Peplink ANT-MB-22G-S-B-6 Mobility 22G 5-in-1 Cellular Antenna with 2x2 MIMO, Dual-Band Wi-Fi, and GPS for Mobile Deployments

Q: What devices is the Peplink Mobility 22G compatible with?

A: The ANT-MB-22G-S-B-6 antenna system is designed to be compatible with most Peplink wireless routers and access points featuring SMA female (cellular/GPS) and RP-SMA female (Wi-Fi) antenna ports. The antenna supports standard 50Ω impedance connections and works with Peplink routers requiring 2x2 MIMO cellular, dual-band Wi-Fi, and GPS connectivity. Contact EpicRise Electronics to verify compatibility with your specific Peplink model.

Q: What is the difference between the Mobility 22G and 40G models?

A: The numerical figures indicate the number of antenna elements: the Mobility 22G includes 2x LTE, 2x Wi-Fi, and 1x GPS element, making it ideal for applications requiring both cellular data and Wi-Fi connectivity. The Mobility 40G includes 4x LTE and 1x GPS elements but no Wi-Fi, designed for applications requiring maximum cellular bandwidth without Wi-Fi needs. Choose the 22G for balanced cellular/Wi-Fi performance, or the 40G for 4x4 MIMO cellular-only deployments.

Q: Does the Mobility 22G support 5G networks?

A: Yes, the Mobility 22G is 5G ready and supports 5G bands n1 through n99 across its 600-6000MHz frequency range. It also supports LTE bands B1 through B86 (except B31, B72, B73, B87, B88), including critical Band 71 for extended rural coverage. The antenna's wide frequency coverage and high gain (up to 6.0dBi at 5-6GHz) ensure optimal performance on both current LTE and emerging 5G networks worldwide.

Q: How do I install the Mobility 22G on my vehicle?

A: Installation requires drilling a single 1 11/16" (43mm) hole through the mounting surface (maximum 15mm thick). Cover the panel surface to protect paint, start with a small pilot hole and gradually increase to final size, clean the surface, and apply paint around the hole to prevent corrosion. Insert the antenna through the hole, secure with the included mounting bracket from inside, and connect cables to your router. The antenna can be mounted on roof panels, walls, or poles using the included hardware. Alternatively, use the included 3M adhesive pad for temporary installations.

Q: Is the Mobility 22G weatherproof for outdoor use?

A: Yes, the Mobility 22G is fully weatherproof with IP68 rating, meaning it's protected against dust ingress and continuous immersion in water. The UV-stable PC+ABS housing withstands operating temperatures from -40°C to 80°C, passes MIL-STD 810F salt spray testing for corrosion resistance, and resists sustained winds up to 220 km/h. The UL 746C F1 rated housing provides long-term UV exposure protection, making it suitable for permanent outdoor mobile installations in all climates.

Q: What is the coverage pattern of the Mobility 22G antenna?

A: The Mobility 22G provides omnidirectional coverage with 360-degree horizontal beam width, meaning it receives and transmits signals equally in all directions around the antenna. This pattern is ideal for mobile applications where the vehicle's orientation constantly changes. The antenna does not require a ground plane and maintains consistent performance regardless of mounting location, though mounting location can affect overall signal strength.

Q: Can I extend the 6.5ft cables if my router is farther away?

A: Yes, Peplink offers extension cables such as the EXC-SQ-15 (SMA male to QMA female, 15ft / 4.5m) for LTE and GPS elements. However, be aware that cable extensions introduce additional signal loss - the CFD-200 cable loses approximately 0.87 dB/m at 5.8GHz. For longer runs, consider using higher-quality low-loss cables or positioning your router closer to the antenna installation point. Always maintain proper impedance matching (50Ω) when using extensions.

Q: Can the black antenna be painted to match my vehicle color?

A: Yes, all Peplink antennas can be painted with any color, but it's critical to use only non-metallic, non-conductive, and non-absorptive paint. Metallic or conductive paints will severely degrade antenna performance by interfering with RF transmission and reception. Use standard automotive non-metallic paint and apply thin, even coats. Alternatively, the Mobility 22G is also available in white (model ANT-MB-22G-S-W-6) if that better suits your fleet's appearance.

Q: What is the GPS receiver's sensitivity and accuracy?

A: The Mobility 22G includes a high-gain GPS receiver with integrated 28±3dB LNA (Low Noise Amplifier) and 1.5dB maximum noise figure at 3.3V, providing excellent sensitivity for reliable positioning even in challenging RF environments or urban canyons. The GPS antenna operates across 1561-1602 MHz with peak gains of 0.5dBi at 1575MHz and 1.6dBi at 1602MHz. The high-gain LNA compensates for cable losses and ensures consistent GPS lock for fleet tracking and navigation applications.

Q: What is the maximum power the Mobility 22G can handle?

A: The cellular and Wi-Fi antenna elements are rated for 10W feed power, which exceeds the output power of typical mobile routers and ensures safe operation with standard Peplink devices. The GPS receiver operates at 3.3V with 8.5±2.5mA power consumption (approximately 28mW). These ratings provide adequate headroom for reliable long-term operation without risk of antenna damage from normal router transmission levels.