Media gallery
Media gallery
Media gallery

Peplink Mobility 42G 7-in-1 Antenna - 4x4 MIMO 5G/LTE + WiFi + GPS for Fleet & Public Safety

Q: What Peplink routers are compatible with the Mobility 42G antenna?

The Mobility 42G is compatible with Peplink MAX Transit Duo, MAX Transit CAT-18, MAX Transit 5G, MAX HD4 MBX 5G, B One 5G, and other Peplink routers supporting 4x4 MIMO connectivity. The antenna provides SMA male connectors for cellular/GPS and RP-SMA male for Wi-Fi, matching standard Peplink router antenna ports.

Q: Does this antenna support 5G frequencies including C-Band and T-Mobile Band 71?

Yes, the Mobility 42G supports comprehensive 5G coverage including all 5G bands n1-n99, C-Band frequencies (3700-3980 MHz within the 3400-4200 MHz range), and T-Mobile's extended range Band 71 (617 MHz within the 617-960 MHz range). The ultra-wideband design ensures compatibility with current and future carrier deployments.

Q: What is the difference between the cable length options for Mobility 42G?

Mobility 42G is available in three cable lengths: 1 ft/0.3 m for short-run installations (model ending in -1), 6.5 ft/2 m for standard vehicle/panel mounting (model ending in -6, this model), and 16 ft/4.8 m for long-distance routing (model ending in -16). Longer cables provide installation flexibility but introduce slightly higher signal loss.

Q: How should I orient the Mobility 42G antenna for optimal performance?

The Mobility 42G is an omnidirectional antenna with 360-degree horizontal coverage, so orientation does not affect signal reception. However, for best performance, mount the antenna as high as possible with the flat side pointing directly upward toward the sky to minimize ground plane interference and maximize line-of-sight to cell towers.

Q: Can this antenna be mounted on metal surfaces or does it require a ground plane?

The Mobility 42G does not require a ground plane for operation and can be mounted on metal, fiberglass, or composite surfaces. The antenna includes a built-in ground plane within its housing, allowing flexible installation on vehicle roofs, equipment panels, or non-metallic surfaces using the included bracket.

Q: What is the IP68 rating and what environments can this antenna withstand?

IP68 rating means the antenna is completely dust-tight and can withstand continuous water immersion. The Mobility 42G operates from -40°C to 80°C, resists wind speeds up to 167 mph, passes MIL-STD 810F salt fog testing for marine environments, and features UV-stabilized housing rated for long-term sun exposure (UL 746C F1), making it suitable for extreme mobile and maritime applications.

Q: Can I paint the Mobility 42G antenna to match my vehicle color?

Yes, all Peplink antennas including the Mobility 42G can be painted. You must use non-metallic, non-conductive, and non-absorptive paint. Avoid paints containing metallic particles (titanium dioxide, iron oxide, etc.) as these act as RF shielding and will significantly degrade antenna performance. Use automotive-grade non-metallic paints for best results.

Q: What is the advantage of the integrated GPS antenna with LNA?

The integrated GPS antenna features a high-gain Low Noise Amplifier (LNA) with 28 dB gain and low 1.5 dB noise figure, providing superior GPS signal reception compared to passive antennas. This enables reliable positioning for fleet tracking, asset management, and navigation applications even in challenging signal environments like urban canyons or under vehicle canopies.

Q: Do I need to purchase additional mounting hardware for installation?

The Mobility 42G includes a standard wall/pole mounting bracket and 3M adhesive pad suitable for most installations. For more robust or adjustable mounting, Peplink offers optional metal L-bracket kits (ACW-881 for white or ACW-884 for black) sold separately. The antenna features 1.25-inch pipe threading (11 TPI) and a 1 11/16-inch mounting hole for various mounting accessories.

Q: What is the cable loss for the 6.5 ft cables and how does it affect performance?

The Mobility 42G uses low-loss RG-174 cable for cellular/GPS (3.4 dB/m @ 1 GHz, 4.9 dB/m @ 1.8 GHz) and CFD-200 cable for Wi-Fi (0.49 dB/m @ 2 GHz, 0.87 dB/m @ 5.8 GHz). At 6.5 ft (2 m), total cable loss is approximately 6.8-9.8 dB for cellular and 1-1.7 dB for Wi-Fi, which is factored into the antenna's overall system design. The higher-quality CFD-200 cable minimizes Wi-Fi signal degradation compared to standard coaxial cable.

Brand Peplink

Model Number MB-42G-S-W-6

UPC 710859518204

EpicRise Warranty First Year

Product Highlights

• 7-in-1 antenna system: 4 cellular + 2 Wi-Fi + 1 GPS in single compact enclosure for simplified deployment

• Ultra-wideband 600-6000 MHz coverage with 4x4 MIMO for maximum 5G/LTE throughput and reliability

• IP68-rated rugged design withstands extreme temperatures (-40°C to 80°C) and wind speeds up to 167 mph

• Dual-band Wi-Fi (2.4/5 GHz) with 2x2 MIMO for local coverage and Wi-Fi as WAN functionality

• GPS receiver with high-gain LNA for accurate positioning in fleet tracking and mobile applications

• Flexible 6.5ft cable length with SMA/RP-SMA connectors compatible with Peplink MAX Transit and HD4 MBX routers

Overview
Specifications
FAQ
User Guides
Reviews

Narrative Description

The Peplink Mobility 42G (ANT-MB-42G-S-W-6) is an enterprise-grade 7-in-1 antenna solution engineered to deliver maximum connectivity performance for mission-critical mobile deployments. Combining 4x4 MIMO cellular, dual-band Wi-Fi, and GPS capabilities in a single low-profile enclosure, this antenna eliminates the complexity of managing multiple antenna systems while providing superior 5G/LTE throughput across an ultra-wide 600-6000 MHz frequency range.

Designed for demanding environments, the Mobility 42G features IP68-rated construction that withstands extreme weather, salt spray, UV exposure, and wind speeds up to 167 mph. Its omnidirectional radiation pattern ensures consistent signal reception from all directions, making it ideal for vehicles, vessels, and field installations where antenna orientation cannot be controlled. The white UV-stabilized polycarbonate housing provides durability without compromising aesthetic requirements for public-facing deployments.

With support for all major LTE bands (B1-B86) and 5G bands (n1-n99), including critical B71 and C-Band frequencies, this antenna future-proofs your connectivity infrastructure. The 6.5ft cable configuration with SMA/RP-SMA connectors provides optimal cable management for roof or panel mounting applications common in transit, public safety, and maritime operations.

Best For

The Mobility 42G antenna is engineered for high-reliability mobile connectivity across diverse enterprise verticals:

- Public Safety & Emergency Services: Mission-critical connectivity for police, fire, and EMS vehicles requiring simultaneous 5G data, Wi-Fi hotspot, and GPS tracking capabilities with zero-compromise reliability in extreme conditions

- Fleet & Transportation: Commercial trucking, bus transit, and logistics fleets demanding high-bandwidth connectivity for real-time telemetry, passenger Wi-Fi, route optimization, and asset tracking across multi-carrier networks

- Mobile Healthcare: Ambulances and mobile medical units requiring reliable connectivity for telemedicine, patient data transmission, and location services while maintaining low-profile aesthetics

- Maritime Operations: Coastal patrol, fishing vessels, and harbor craft needing rugged IP68-rated connectivity that withstands salt spray and high winds while supporting GPS navigation and broadband communications

- Field Operations & Remote Sites: Construction, utilities, and energy sector mobile offices requiring robust multi-carrier connectivity with Wi-Fi extension and GPS positioning in temporary or mobile installations

Key Features

- 4x4 MIMO Cellular Performance: Four independent cellular antenna elements deliver optimal 5G/LTE throughput with frequency-specific gains from 2.7 dBi (617-960 MHz) to 6.7 dBi (5-6 GHz) for maximum data rates

- Ultra-Wideband Frequency Coverage: Single antenna supports 600-6000 MHz spectrum including LTE bands B1-B86, 5G bands n1-n99, T-Mobile B71, and C-Band for comprehensive carrier compatibility

- Integrated Dual-Band Wi-Fi: 2x2 MIMO Wi-Fi antenna delivers 5.0 dBi gain at 2.4 GHz and 7.5 dBi at 5 GHz for local hotspot and Wi-Fi as WAN functionality

- High-Performance GPS Receiver: Active GPS antenna with 28 dB LNA gain and 1.5 dB noise figure ensures reliable positioning even in challenging signal environments

- IP68 Environmental Protection: Fully sealed enclosure withstands water immersion, dust infiltration, salt fog (MIL-STD 810F), and temperature extremes from -40°C to 80°C

- Omnidirectional Radiation Pattern: 360-degree horizontal beamwidth eliminates dead zones and maintains connectivity regardless of vehicle orientation or movement

- Low-Profile Rugged Design: Compact 8.19" diameter x 2.28" height white UV-stabilized housing mounts flush to roof/panel surfaces with included bracket or optional L-bracket

- Flexible Installation Options: 6.5ft low-loss cables (RG-174 for cellular/GPS, CFD-200 for Wi-Fi) with SMA/RP-SMA male connectors compatible with Peplink MAX Transit series, HD4 MBX 5G, and B One 5G routers

Quick Specs

Specification	Details
Model Number	ANT-MB-42G-S-W-6 (Mobility 42G)
Antenna Configuration	7-in-1: 4x Cellular (4x4 MIMO) + 2x Wi-Fi (2x2 MIMO) + 1x GPS
Cellular Frequency Range	600-6000 MHz (ultra-wideband)
Cellular Gain	2.7 dBi (617-960 MHz), 5.2 dBi (1710-2700 MHz), 4.9 dBi (3400-4200 MHz), 6.7 dBi (5-6 GHz)
LTE Band Support	B1-B86 (excluding B31, B72, B73, B87, B88), includes B71
5G Band Support	n1-n99, includes C-Band
Wi-Fi Frequencies	2400-2500 MHz, 5000-6000 MHz (dual-band)
Wi-Fi Gain	5.0 dBi (2.4 GHz), 7.5 dBi (5 GHz)
GPS Frequency	1561-1602 MHz
GPS LNA Gain	28 ±3 dB, 1.5 dB max noise figure
Connectors	SMA male (cellular/GPS), RP-SMA male (Wi-Fi)
Cable Length	6.5 ft / 2 m
Cable Type	RG-174 (cellular/GPS), CFD-200 (Wi-Fi)
VSWR	<2.5 (cellular/Wi-Fi), <2 dB (GPS)
Impedance	50 Ω
Dimensions	8.19" diameter x 2.28" height / 208 x 58 mm
Mounting Hole	1 11/16" / 43 mm diameter
Mounting Thread	1.25" pipe thread, 11 TPI
Housing Color	White (UV-stabilized polycarbonate)
IP Rating	IP68 (dust/water ingress protection)
Operating Temperature	-40°C to 80°C / -40°F to 176°F
Wind Resistance	137-167 mph / 220-268 km/h
Environmental Testing	MIL-STD 810F salt fog, UL 746C (F1 UV), ASTM B117
Cable Flammability	UL 758 (VW-1), housing UL 94 HB
Compliance	RoHS, REACH, WEEE
Compatible Routers	Peplink MAX Transit Duo/CAT-18/5G, HD4 MBX 5G, B One 5G, other 4x4 MIMO models
Radiation Pattern	Omnidirectional (360° horizontal)
Polarization	Linear (cellular/Wi-Fi)
Input Power	10W (cellular/Wi-Fi)
Weight	Refer to packaging documentation

What's Included

- Mobility 42G antenna assembly with pre-attached cables (4x cellular SMA, 2x Wi-Fi RP-SMA, 1x GPS SMA)

- Wall/pole mounting bracket

- 3M adhesive mounting pad (8.19" / 208 mm diameter, 0.08" / 2 mm thick)

- Installation hardware and documentation

Product Details
Color	White

What Peplink routers are compatible with the Mobility 42G antenna?

The Mobility 42G is compatible with Peplink MAX Transit Duo, MAX Transit CAT-18, MAX Transit 5G, MAX HD4 MBX 5G, B One 5G, and other Peplink routers supporting 4x4 MIMO connectivity. The antenna provides SMA male connectors for cellular/GPS and RP-SMA male for Wi-Fi, matching standard Peplink router antenna ports.

Does this antenna support 5G frequencies including C-Band and T-Mobile Band 71?

Yes, the Mobility 42G supports comprehensive 5G coverage including all 5G bands n1-n99, C-Band frequencies (3700-3980 MHz within the 3400-4200 MHz range), and T-Mobile's extended range Band 71 (617 MHz within the 617-960 MHz range). The ultra-wideband design ensures compatibility with current and future carrier deployments.

What is the difference between the cable length options for Mobility 42G?

Mobility 42G is available in three cable lengths: 1 ft/0.3 m for short-run installations (model ending in -1), 6.5 ft/2 m for standard vehicle/panel mounting (model ending in -6, this model), and 16 ft/4.8 m for long-distance routing (model ending in -16). Longer cables provide installation flexibility but introduce slightly higher signal loss.

How should I orient the Mobility 42G antenna for optimal performance?

The Mobility 42G is an omnidirectional antenna with 360-degree horizontal coverage, so orientation does not affect signal reception. However, for best performance, mount the antenna as high as possible with the flat side pointing directly upward toward the sky to minimize ground plane interference and maximize line-of-sight to cell towers.

Can this antenna be mounted on metal surfaces or does it require a ground plane?

The Mobility 42G does not require a ground plane for operation and can be mounted on metal, fiberglass, or composite surfaces. The antenna includes a built-in ground plane within its housing, allowing flexible installation on vehicle roofs, equipment panels, or non-metallic surfaces using the included bracket.

What is the IP68 rating and what environments can this antenna withstand?

IP68 rating means the antenna is completely dust-tight and can withstand continuous water immersion. The Mobility 42G operates from -40°C to 80°C, resists wind speeds up to 167 mph, passes MIL-STD 810F salt fog testing for marine environments, and features UV-stabilized housing rated for long-term sun exposure (UL 746C F1), making it suitable for extreme mobile and maritime applications.

Can I paint the Mobility 42G antenna to match my vehicle color?

Yes, all Peplink antennas including the Mobility 42G can be painted. You must use non-metallic, non-conductive, and non-absorptive paint. Avoid paints containing metallic particles (titanium dioxide, iron oxide, etc.) as these act as RF shielding and will significantly degrade antenna performance. Use automotive-grade non-metallic paints for best results.

What is the advantage of the integrated GPS antenna with LNA?

The integrated GPS antenna features a high-gain Low Noise Amplifier (LNA) with 28 dB gain and low 1.5 dB noise figure, providing superior GPS signal reception compared to passive antennas. This enables reliable positioning for fleet tracking, asset management, and navigation applications even in challenging signal environments like urban canyons or under vehicle canopies.

Do I need to purchase additional mounting hardware for installation?

The Mobility 42G includes a standard wall/pole mounting bracket and 3M adhesive pad suitable for most installations. For more robust or adjustable mounting, Peplink offers optional metal L-bracket kits (ACW-881 for white or ACW-884 for black) sold separately. The antenna features 1.25-inch pipe threading (11 TPI) and a 1 11/16-inch mounting hole for various mounting accessories.

What is the cable loss for the 6.5 ft cables and how does it affect performance?

The Mobility 42G uses low-loss RG-174 cable for cellular/GPS (3.4 dB/m @ 1 GHz, 4.9 dB/m @ 1.8 GHz) and CFD-200 cable for Wi-Fi (0.49 dB/m @ 2 GHz, 0.87 dB/m @ 5.8 GHz). At 6.5 ft (2 m), total cable loss is approximately 6.8-9.8 dB for cellular and 1-1.7 dB for Wi-Fi, which is factored into the antenna's overall system design. The higher-quality CFD-200 cable minimizes Wi-Fi signal degradation compared to standard coaxial cable.